How To Successfully Dry Cannabis Without Any Complications

Cannabis has been used for centuries as a medicinal plant and recreational drug. But, if you’re looking to get high without any of the undesirable side effects, you’ll need to get your hands on some dry cannabis.

Cannabis is also often touted as a natural treatment for many ailments, but when it comes to drying your cannabis – that isn’t always the case. If you are considering snaking, rosin, or any other form of “material” for drying and properly curing your cannabis, learn proper cannabis drying procedures and how the method you use can ensure that the end product turns out good.

Every cannabis user knows the risk of drying cannabis improperly, but with the end of prohibition, more people are venturing into the growing world. In this article, you’ll learn about a poorly drying cannabis plant’s increased chlorophyll levels, plus observations to make sure your plants don’t make it to that point.

How to Dry Cannabis Simplified:

If you’re looking for a way to dry cannabis without any complications, you can try the method described in this article. This method will work with most cannabis strains and won’t damage the plant. You’ll need some supplies, including a clothes dryer and a large container.

1. Start by removing the stem and any attached leaves using a sharp knife or stem cutter. If the plant is huge, you may need to break it up into smaller pieces.

2. Spread the cannabis on a flat surface and use a clean cloth, paper towel, or piece of fabric to blot away the moisture gently. This will help remove excess water from the plant material.

3. Place the cannabis in an oven preheated to 150 degrees Fahrenheit for 12-24 hours. The goal is to dry it entirely so it will not rot or contain mold. Wait until the leaves are dehydrated and brittle. Do not overheat the clothes dryer, or the plant may be damaged.

4. Place the dried leaves in a large container and store them away until you are ready to use them.

These steps will help you dry your cannabis plant without any complications. Be sure to follow the instructions carefully, and you should get good results with just a few minutes of work.

What can happen when cannabis gets too wet before the drying process?

A few things can happen when cannabis gets too wet before it is dried. Some examples include mold, spores growing, and THC degradation.

When cannabis is too wet, the leaves and flowers can begin to rot. This process is called botrytis, and it causes the leaves to turn brown and mushy, the flowers to droop, and the cannabinoids to break down. Botrytis can also cause spores to grow, which can lead to fungal diseases like black spots.

The most important thing to remember when drying cannabis is that the humidity needs to be low enough for the leaves to remain dry but high enough so that the flowers don’t start to rot. It’s best to aim for a humidity level of around 40-60% while drying cannabis. Too much humidity will cause the leaves to rot prematurely, and the buds will have a bad smell and taste. Keep an eye on the humidity levels using a hygrometer or a dew point thermometer. Most cannabis sages can go up to 40% when they’re finished drying or when all the THC has been lost. Once you’ve finished drying cannabis, store it in a familiar place (not in your fridge) until it is time to chop and manicure. Also, check that there are no pests like mites and molds. Always remember that if anything looks unsightly after you’ve harvested it, wash it as best you can, consider using a fungicide derived from Nature for protection against fungi, and discard harboring bugs!

Cannabis can spoil and become harmful if it gets wet before it is dried. This means that careful considerations must be taken when drying cannabis.

Some potential problems when drying cannabis include mold growth, terpene loss, and craftiness issues.

Mold growth can occur when wet cannabis is subjected to high humidity levels. This allows mold to grow and form colonies, producing harmful toxins. Terpene loss can also occur when cannabis is dried at high temperatures, as heat breaks down the cannabinoids and terpenes. This can lead to a reduction in the potency of dried cannabis. Craftiness issues may arise when cannabis is dried at too low of a temperature, which can cause it to become brittle and grainy.

Avoid common mistakes with dried cannabis buds.

Drying cannabis

When cannabis is dried, it can be easily damaged. There are a few things to consider when drying cannabis if you want to avoid common mistakes.

1. Make sure the buds are clean and free of mold or spores. Mold can cause the buds to dry out and become brittle, resulting in breakage or damage during drying.

2. Try to use a low-temperature drying method, such as an oven, rather than a high-temperature method, such as the sun or a dehydrator, to reduce the chance of damage.

3. Avoid over-drying cannabis buds, as this can make them brittle and prone to breakage. Instead, allow them to air dry slowly until they are completely dry. 

One of the most important things to know is that drying cannabis buds can be very dangerous if not done correctly. Make sure to ventilate the area where you’re drying the buds properly, and use a fire retardant if necessary. Additionally, never leave your buds in direct sunlight or under a heat source, as this can cause them to burn or undergo other damage.

When drying cannabis buds, starting with a low humidity level is vital, and increasing it gradually as needed. This will help ensure that the buds don’t get too brittle or discolored. Make sure to store your dried cannabis in an airtight container in a cool, dark place for maximum shelf life.

Key points to remember when drying weed:

Drying weed is a great way to preserve it and keep it fresh. However, there are a few things that you need to be careful about when drying cannabis.

When drying weed, it is crucial to keep the humidity low. High humidity levels can cause the weed to become moldy or damaged.

It is also essential to make sure that the plant is dry before storage. This means that you should not allow the plant to sit in water or moisture for too long.

Finally, always remember to take safety precautions when drying cannabis. Make sure that your place is clean and free of combustible materials. Also, ensure the ventilation in the room is good so as not to produce strong fumes. Of course, consult a cannabis dispensary for advice about procedures often used for drying and storing pot.

Drying marijuana is a great way to ensure it remains fresh and potent. Here are a few essential things to keep in mind when drying cannabis. Hence, when drying cannabis, keep in mind the following tips:

1. Make sure the temperature is correct: 

Marijuana will dry out quickly if the temperature is too high or too low. Make sure the temperature is between 65 and 75 degrees Fahrenheit.

2. Don’t over-dry it:

 Over-drying cannabis can cause it to become brittle and tough to smoke. Use about half as much water as you would for freshly dried marijuana. This will help to prevent overdrying and preserve potency.

3. Avoid direct sunlight: 

Exposure to direct sunlight can damage plants and increase the chances of mildew growth. Try to dry cannabis in a place where it will not be exposed to direct sunlight for extended periods of time.

By following these tips, you can ensure that your cannabis remains fresh and potent while it’s being dried.

Some helpful tips for finishing the drying process

Drying Medical cannabis

There are many helpful tips for finishing the drying process of cannabis. One thing to be careful of is airflow. If the airflow is disrupted, the moisture in the bud can condense and cause mold and mildew.

It is also important to make sure that the buds are completely dry before storing them. Most importantly, don’t stack cannabis buds on top of each other. Doing so can cause the heat to penetrate deeper and cause more damage.

When drying cannabis, it is pivotal that the cannabinoids are preserved. To do this, it is important to use the correct temperature and humidity levels.

Fresh cannabis should be cured for anywhere from one day to two weeks, depending on how much you intend to use and your desires in the future. Waiting too long will result in weaker flowers that do not produce potent buds because of cannabinoids that have been destroyed by heat. 

To properly cure marijuana, try using a humidifier to ensure constant moisture levels. This also goes hand in hand with maintaining a good home herb garden safe from mold or bacteria. If you grow cannabis indoors, you will likely have a crock pot and an oven in your home. 

Crocking cannabis is sometimes referred to as “Drying Out” since fresh buds will change color when exposed to heat. Simply spread out a layer of the buds on newspaper or expandable bags over an oven-safe dish. Place the items in a location (indoors and out of direct sunlight) with temperatures between 200-220 degrees F. Small joints can take as little as 45 minutes, while large ones 2 to 3 hours. When building a marijuana humidor, choose the wood that has been seasoned for the best results. Storage will be better if you build your own with ACQ-certified wood products that have already experienced naturally occurring seasoning from fungi that thrive on the product. Avoid adding any type of oil or other preservatives to your herb when placing them in the herb Humidor, as this will upset the balance needed during storage, leading to mold becoming more difficult to remove after the herbs have seasoned. 

During the curing process, the herb should receive moisture during its rest period, but there should be no mopping or flooding to stop further curing by halting it with excessive moisture. If needed, fill your home humidor with desiccant that is not overly moist. The best humidity is kept in a closed room between 40-45% RH (relative humidity), although higher frequency mold growth is possible, approaching 60% RH (relative humidity).


  • Follow the instructions that come with your cannabis dryer to ensure optimal drying results.
  • Make sure all surfaces that will be in contact with the cannabis are clean and free of any oils or residues.
  • Avoid using too much heat, as this can damage the plant material.
  •  Make sure the cannabis is completely dry before storing or using it.
  • Use a proper drying chamber. A cheap oven or dehydrator will not work well for this process.
  • Choose the right material for your chamber. Some materials work better than others for cannabis drying. Avoid using metal in the chamber, as it can contribute to problems.
  • Use a fan to help speed up the drying process.
  • Monitor the temperature and humidity levels constantly. If they get too high or low, adjust the fan or heat setting accordingly.
  • Keep an eye on the buds during the drying process; if they start to crack or become brittle, stop the drying process and reshuffle the buds into a new chamber.

Storage Tips

Storing Medical cannabis

When it comes to storing your cannabis, there are a few things to keep in mind. First and foremost, make sure the environment is as dry as possible. This will help to prevent mold and other complications. Additionally, make sure your cannabis is stored in an airtight container to avoid odor and moisture buildup. Finally, make sure you rotate your strains so that you are constantly trying new varieties!

There are a few tips that can help you store cannabis securely and successfully:

  • Store dried cannabis in a cool, dark place. When stored in an airtight container, cannabis will last up to one year.
  • Do not expose cannabis to heat or light. Exposure to high temperatures or bright light can damage the cannabinoids and other compounds in the plant.
  • Keep cannabis away from other herbs and plants, as they may contain harmful chemicals that could contaminate your stash.
  • When purchasing cannabis, make sure to choose a reputable source. Some unscrupulous dealers may sell subpar products or even fake products.


If you are looking to dry cannabis without any complications, using a drying rack is the best way to go. Drying racks can help cannabis stay fresh and free from the mold for a long time, which is important if you plan on storing your herb in an airtight container or jar.

Therefore, drying cannabis successfully is essential if you want to store it for long-term use. Unfortunately, not all marijuana plants are created equal when it comes to their water retention abilities, which can lead to complications when drying the plant.

Kwame Robinson

Kwame Robinson

Leave a Replay